This all in one e-bike lighting kit includes:
The Sate Lite SPL-01 super bright 3 mode headlight. Uses reflector for beam shape, has high beam/low beam/DRL
The Hilleater 911 super bright 2 mode rear light. Super bright to get drivers attention. Defaults to flash mode, press mode button to toggle to steady for night riding.
The Hilleater XT-60 power tap inserts between the battery and controller on your bike to access the power stored in your main battery. Has an extra XT60 connection for other accessories or a second battery. 2X Higo outputs are fused with auto reset fuses to protect the wires.
You get the XT-60 power tap and XT-60 connectors for free as compared to purchasing all three items individually, plus free shipping with this kit!
Accessories included in the kit:
Stem mounting bracket with hardware for SLP-01 light.
4" to 50mm spacing adapter plate with hardware for mounting the 911 light on a standard rear rack.
Handlebar mounted on/off mode switch for SPL-01 light.
Handlebar mounted on/off and mode switch for 911 light.
172cm extension wire for 911 light.
Male and Female XT60 connectors in case your bike does not already use these.
You have to be able to access the power wire between the battery and controller to install this kit. The red Higo light lead on most e-bikes will not supply enough current to run these lights. (Some controllers will have enough current to run these lights, but its best to contact the manufacturer and ask if the light output will deliver 24 watts before plugging in.) They will run on 12-60V, and draw a maximum of 24 watts.
Full descriptions of these products can be found here:
https://hilleater.ca/spl-01-super-bright-20-watt-led-headlight-with-hi-low-drl/
https://hilleater.ca/hilleater-911-super-bright-rear-light-for-ebikes/
https://hilleater.ca/xt60-power-tap-splitter-for-e-bike-headlight-lighting-and-dual-battery-setups/