Set of both male and female connectors to repair a Reention Dorado battery to bike power problem for bikes with the 5 pin battery connectors
The Reention part numbers for these connectors are PLA0049 and PLA0050 5 pin
The other use for the male connector is to access the power stored in your ebike battery for other uses. Use a digital adjustable DC-DC converter to step down the voltage for use with 12V accessories, or 19V for your laptop etc. Great for power outages, or camping.
Battery fitment problems can lead to a damaged connector on the battery. Some batteries also had a connector which allowed the metal contacts to slide back, resulting in an intermittent connection.
Replacing this connector is not trivial, You must be able to make a good solder joint. The output leads on some batteries without a switch to turn off, or a fuse to remove are live at all times so extreme care must be taken when replacing the connector. Also soldering must be done by an expert, as it is easy to damage the new connector with too much heat, and a less than professional soldering job could lead to wires coming loose, and a short circuit in the battery which could damage the battery or even lead to a fire.
You have been warned!
USA Shipping for parts and accessories:
- Canada Post small packet air- Usually arrives in 10-14 days. No tracking on this economy service
- Canada Post Tracked Packet- 10 Business days, includes tracking
- Canada Post Expedited parcel- 7-8 business days, includes tracking
- Canada Post Express- 5-6 Business days, includes tracking
