- Safety: Lighting and Mirrors
- Roxim X4 6 Watt e-bike, no switch. Removed from new bike.
Roxim X4 6 Watt e-bike, no switch. Removed from new bike.
400 Lumen ebike light with wide 6-85V input range. Draws 6 Watts. Has 2 pin Higo connector to power directly off your e-bike batteries via a Cycle Analyst or Anderson Tap. Features a fender mount attachment, and uses reflective optics for StVZO compliance so that all the light shines on the road and not into oncoming traffic.
Works with juiced bikes.
Does not work with 2020 Rad bikes, because it draws too much power from the stock controller. It could be wired into the harness between the battery and the controller if you are handy.
Check the polarity of your headlight wire before connecting, a reverse connection will burn out the light, and is not covered under warranty. On light, with the connector facing you, and the tab facing down the left pin is positive. On the bike harness with the connector facing you and the tab facing down the right socket is positive.