E-bike handlebar switch with Higo connectors for plug and play lighting

Add a switch for lighting or other accessories with no soldering required.

Aluminum switch fits 22.2mm handlebars.

Split attachment means you don't have to remove grips to add the switch.

Has a 2 pin male Higo connector for attachment to your lighting harness, controller or battery.

Has a 2 pin Higo female Higo connector to plug in your light(s)

Connectors rated for up to 2 amps

Has a 165mm wire to a Y where the two wires split off.

The female output Higo runs an additional 390mm from the Y where the wires split.

The male input Higo runs an additional 590mm from the Y where the wires split.

Works well with our lights:

https://hilleater.ca/sate-light-m9-cree-e-bike-rear-light/

https://hilleater.ca/sate-light-c7-super-3-6-watt-e-bike-headlight/

https://hilleater.ca/roxim-x4-6-watt-e-bike-no-switch-removed-from-new-bike/