Reention bike side battery power input connector

Roll over to magnify and click to enlarge
  • Image 1

Product Reviews

Write Review

  1. Easy replacement piece

    Posted by Fredrick Rondpre on 2020 Mar 6th

    The wires became detached on my previous unit, so I replaced with this one. Works great, only issue was that I had to remove and replace the connecting wires, but the unit worked well.


Out of Stock

Product Description

Bike side power connector for Reention battery system as used on Juiced and Hilleater bikes.  Has wires soldered onto the connector, the other side is Anderson PP45 connectors.  Replace your original connector by soldering the appropriate connector in place of the Andersons.  In the case of the CrossCurrent you would need to splice the wires to the controller by soldering and heat shrinking.  The CrossCurrent S uses an XT60 connector to connect to the controller, which you could re use or purchase a new connector.

The other use for this pigtail is to access the power stored in your ebike battery for other uses. Use a digital adjustable DC-DC converter to step down the voltage for use with 12V accessories, or 19V for your laptop etc.  Great for power outages, or camping.